ABB 3HNE00188-1 Teach Pendant Cable (10m) for S4C / S4C+ Controllers

ABB 3HNE00188-1 Teach Pendant Cable (10m) for S4C / S4C+ Controllers

Product Description

The ABB 3HNE00188-1 is a high-performance 10-meter programming unit cable specifically engineered for the ABB S4C and S4C+ control systems. This cable acts as the vital communication link between the Teach Pendant (TPU) and the robot controller, ensuring precise manual control, programming, and system diagnostics.

Designed for the rigors of industrial automation, this cable features a heavy-duty PUR (Polyurethane) jacket that offers exceptional resistance to oils, chemicals, and mechanical abrasion. Whether you are performing initial system commissioning or routine maintenance, the 3HNE00188-1 provides the stable signal transmission necessary for safe and efficient robotic operation.

Key Features

• OEM Compatibility: Fully compatible with ABB S4C and S4C+ controllers and the 3HNE00313-1 Teach Pendant.

• Industrial Durability: Built with high-flex materials to withstand repeated bending and torsion cycles typical in robot teaching environments.

• Plug-and-Play Setup: Features pre-configured 14-pin male (XP20) and 12-pin female connectors for secure, error-free installation.

• Oil & Chemical Resistance: The outer jacket is designed for harsh factory floors, protecting internal wiring from industrial contaminants.

• Extended Reach: The 10-meter (32.8 ft) length provides operators with ample mobility to move around the robot cell during programming.

Technical Specifications

Industrial Applications

• Robot Programming: Essential for handheld control during the creation and editing of robot paths.

• System Commissioning: Used for initial calibration and testing of newly installed ABB robotic arms.

• Maintenance & Repair: A standard replacement part for worn or damaged pendant cables to prevent communication downtime.

• Fault Diagnosis: Enables technicians to interface directly with the controller while positioned near the manipulator.

Frequently Asked Questions (FAQ)

1. Is this cable compatible with the newer IRC5 controllers?

No, the 3HNE00188-1 is specifically designed for the S4C and S4C+ generations. IRC5 controllers typically use different connector types and communication protocols.

2. Can I get this cable in a custom length?

While the standard length is 10 meters, custom lengths (e.g., 20m or 30m) are often available upon request to accommodate larger robot work cells.

3. Does the cable include the Emergency Stop (E-Stop) circuitry?

Yes, this cable is designed to support all standard teach pendant functions, including the safety-critical Emergency Stop and enabling device signals required by ISO standards.

4. How do I know if my cable needs replacement?

Common signs of failure include intermittent communication loss, “Pendant Disconnected” errors on the controller, or visible cracking/tearing in the outer protective jacket.