A660-2005-T652 FANUC Encoder Signal Cable

A660-2005-T652 is a JF1 X‑axis encoder signal cable for FANUC CNC/servo systems.
It is part of the A660-2005 encoder cable series and is used to connect a K17 FANUC JF1 X‑axis encoder to the CNC controller/servo amplifier.

The FANUC A660-2005-T652 (often marked as A660-2005-T652#ICEM-XPC) is a dedicated JF1 X‑axis encoder cable assembly within the A660-2005 robot/cable series.
It transmits encoder feedback signals from the K17 FANUC JF1 X‑axis encoder to the servo amplifier or CNC controller, enabling precise position and speed control of the X axis in machine tools and automation systems.

Key Features

• FANUC‑specified JF1 X‑axis encoder cable for K17 encoder applications.

• Part of the A660-2005 encoder cable family, designed for industrial CNC / servo systems.

• Shielded, copper‑conductor construction for noise immunity and signal integrity in harsh environments.

• Supports high‑resolution encoder feedback for accurate axis control.

Compatible Controllers / Robots or Systems

• Primary use: FANUC CNC / servo systems with K17 FANUC JF1 X‑axis encoder.

• Applications: X‑axis encoder feedback in CNC machine tools, motion axes or external servo axes where FANUC specifies A660‑2005‑T652 as the encoder cable

Specifications

• Part Number: A660-2005-T652

• Type: JF1 X‑axis encoder signal cable

• Series: A660-2005 encoder cable family (industrial shielded encoder cables)

• Function: Connects K17 FANUC JF1 X‑axis encoder to servo amplifier/controller; transmits incremental pulse/feedback signals

• Construction: Shielded, copper conductors; industrial‑grade insulation for oil and mechanical stress resistance

• Typical environment: CNC machine tool control cabinet and servo drive cabinet

FAQ

Q1: Is A660-2005-T652 a teach pendant cable?
No. It is an encoder signal cable for the JF1 X‑axis encoder (K17), not a teach pendant or general robot power cable

Q2: Which encoder does it work with?
It is designed for K17 FANUC JF1 X‑axis encoder applications and must be matched to that encoder type and axis

Q3: Can I use A660-2005-T652 on other axes or encoders?
It belongs to a specific JF1 X‑axis encoder configuration. Using it for other encoders or axes should only be done if FANUC documentation explicitly lists A660‑2005‑T652 for that application

Q4: Is this cable shielded?
Yes. Like other A660‑2005 encoder cables, it uses shielded copper conductors for EMI protection and reliable feedback signal transmission.